The MDT Skeleton Rifle Stock V5 is now available in two different lengths (Standard & Short). Refer to the Length Of Pull (LOP) table below to find out how each SRS V5 / chassis system combination will affect the LOP. The Skeleton Rifle Stock will also work with our LSS chassis using the fixed stock adapter.
Specifications
- Fixed buttstock interface
- Thumbwheels for tool-less adjustment of LOP & cheek rest height
- Angular adjustment of cheek rest up to 8 degrees on either side
- Integrated bolt cut-out in cheek rest
- M-Lok slot for 1.5” rail or other M-Lok accessories (Not included)
- Two QD flush cup sling mounts on either side
- Weight:
- SRS V5 = 944 gr (2.08lbs)
- SRS V5 Short = 952 gr (2.10 lbs)
Hardware Included
- 1/4”-20 x 3/16” Brass Tip set screws
- 1/4”-28 x 3/4” BSHCS
- SRS Mini Buffer Tube
Length of Pull Chart
| LOP TABLE | TAC21 | LSS | HS3 | HS3** | LSS-XL | LSS-XL Gen2 Fixed |
| MDT SRS V5 | 15″-16″ | 15.6″-16.6″ | 13.5″-14.5″ | 14.5″-15.5″ | 13.5″-14.5″ | 13.5″-14.5″ |
| MDT SRS V5 Short | 14″-15″ | 14.75″-15.75″ | 12.5″-13.5″ | 13.5″-14.5″ | 12.5″-13.5″ | 12.5″-13.5″ |
| Folding Stock Adapter | +1.75″ | +1.75″ | +1.75″ | +1.75″ | +1.75″ | +1.75″ |
**HS3 models with buttstock interface
Version Improvements
V5 – The following improvements were included in the new version of our SRS buttstock:
- Additional adjustments possibilities
- Thumbwheels for tool-less adjustments
- Bolt cut-out in cheek rest
- Two different lengths (SRS V5 Standard & SRS V5 Short)
Compatibility
MDT’s Skeleton Rifle Stocks V5 are compatible with various MDT chassis systems as shown in the table below. Please note, as indicated in the LOP table above, that your LOP will vary depending on which chassis system / SRS V5 combination you choose for your bolt action rifle. 
Reviews
There are no reviews yet.